What is a Pressure Reducing Valve?

What is a Pressure Reducing Valve?

Kimray’s Pressure Reducing Valve (or Regulator) is used to create and hold a downstream pressure set point. It is considered an “integrated valve” because the pilot and the valve are one piece.

You’ll often see the Pressure Reducing Valve used as a suction controller or recirculation valve on compressors, or to supply fuel gas.

How Does a Pressure Reducing Valve Work?

This valve monitors downstream pressure. Turn the bolt on top to adjust the set point. This will in turn compress the spring.

The spring pushes down on the sensing diaphragm assembly, which positions the pilot plug. The pilot plug then allows gas from upstream to flow under the motor valve diaphragm. The pressure is controlled under this diaphragm to position the plunger to any changes in flowing conditions.

If the pressure exceeds the set point, the upstream pressure pushes up on the sensing diaphragm assembly, closing off the pilot plug. This allows gas to be vented from underneath the motor valve diaphragm and the downstream pressure to be regulated.

This sets a constant downstream pressure.

Because the diaphragm has a larger surface area than the plunger, the same pressure can hold the valve in a closed position when needed.

If you have questions about the Pressure Reducing Valve or any other Kimray product, reach out to your local Kimray store or authorized distributor.

Breck Swigart serves as a Product Manager at Kimray, and is responsible for Kimray’s line of pneumatic valves, pneumatic pilots, regulators and temperature controllers. He collaborates with Kimray’s engineering, manufacturing, and quality teams to optimize the performance of our products and make a difference for our customers.