Having difficulty removing upper cage in HPCVPB?

Question Having difficulty removing the upper cage in the High Pressure Control Valve Piston Balanced? Answer Here’s the right tool for the Job! Part No. Valve Description 5296 2″ Upper Cage Puller with Part No. 3003 Screws 5297 3″ Upper Cage Puller with Part No. 100 Screws 5298 4″ Upper Cage Puller with Part No.
+ Read More

Piston Balanced Flanged Valve Body Options

Piston Balanced High Pressure Control Valves (flanged options) Note: Use this image as a reference to our piston balanced high pressure control valve options.

Use the 125# Spring in Ductile and Steel Regulators

Use the 125# Spring in Ductile and Steel Regulators

Focus on the Setpoint A number of compressor operators who require the higher design pressure regulators are trying to set the regulators at 5 to 10 psi. Although the 300 pound spring used in the ductile and steel regulators should theoretically provide setpoints as low as 5 psi, it is not really practical to try
+ Read More

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29

Have a Question About Our Products? ...