How to Operate the Kimray Glycol Pump

At the heart of any glycol dehydration system is the glycol pump. This pump works within the dehydration system to recirculate liquid and help the system remove water vapor from natural gas. 

How the Glycol Pump Works

Fundamentally, the pump does two things at the same time:

  1. Moves wet (or rich) glycol from the contactor to the reboiler
  2. Moves dry (or lean) glycol from the reboiler to the contactor

The pump uses energy from the wet glycol and a small quantity of gas at contactor pressure to stroke the piston inside the pump.

High-pressure wet glycol from the contactor enters the top of the pump. It is then diverted to the end of the piston. This causes the piston to stroke.

As the piston strokes, three additional processes occur:

  1. the pump sends high-pressure dry glycol on the inside of the pump cylinder out the top of one end of the pump to the contactor
  2. the pump pulls low-pressure dry glycol from the reboiler into the cylinder through the back of the pump 
  3. the pump sends low-pressure wet glycol from the other end of the pump to the reboiler

As the piston reaches the end of its stroke, a series of check valves and d-slides switch to redirect the high-pressure wet glycol to the other end of the piston.

This continual back-and-forth movement of the piston is what pumps the glycol in and out of the pump to the different components of the dehydration system.

The glycol pump does not require a power source outside of the dehydration system.

Kimray’s Energy Exchange Glycol Pump is a durable, low-maintenance solution for recirculation of glycol in your dehydration system.


If you’d like more information on this or any other Kimray product, contact your local Kimray store or authorized distributor.

Other Resources: Repair Videos | Circulation Chart | Product Page


Want to receive helpful resources like this directly in your inbox?

Subscribe to the Kimray Chronicle

Brian Levings serves as a Product Manager at Kimray, and is responsible for Kimray’s line of ball valves and glycol pumps. He collaborates with Kimray’s engineering, manufacturing, and quality teams to optimize the performance of our products and make a difference for our customers.